Height Adjustable 17 to 32 inch Single Monitor Articulating Wall Mount for Standing Workstations, Fits 1 Screen with Max VESA 100x100mm, Black, MOUNT-VW01A

Nice well made. Gives me great monitor height, rotation and angle adjustment. Added bonus that no more stand on the desk making things much tidier. I pushed my lock with my 34" ultra wide screen monitor but it copes well. Easy to fit and a good price

I am really impressed with the quality of of this wall mount. It is solid thick metal with some plastic parts. Seems like it will have no problem holding up to 32" monitor (mine is 24). Easy to install - the VESA mount connects to your monitor with 4 screws and then slides into the wall mount once you connect it to the wall and is then secured with one screw on the side. Because you can rotate the monitor on the mount, it is not critical to do a perfect vertical drilling job. The height adjustment mechanism and tilt is not the easiest to use - I would go for a more versatile arm if I wanted to move the monitor up and down several times a day. However, for the occasional height adjustment it will do just fine.

Wow this is a great mount, only reason I would give 4 stars is that it has the strangest wall plugs I've ever seen but everything you need for it is include (besides the impact driver/drill ofcourse).

Great Wall bracket for small TV or monitor. Well made product.

I wanted a low profile mount for my gaming monitor and had limited desk space as it is. This mount kept the monitor as far from my sitting position as possible and did exactly what I wanted it to do. The elements of the mount are very sturdy and fitting the monitor to the mount was very simple. As you would expect with it being close to the wall, there isnt much tilt/swivel to the mount but there is enough to help you get the perfect angle.

Works well

Total junk. The tilt and swivel are both controlled by the tightness of a central bolt that cannot be accessed with a screen mounted. Thats means you either have it so tight the screen cannot be adjusted, or loosen it a little and the screen sags when mounted.

Nice wall mount for the 32inch monitor

Heel handige monitor-muur-mount-plate (!) In hoogte verstelbaar (+ kantelen , tilten , draaien) & geeft (zoals in mijn geval) meer stevigheid (door groter verbindingsoppervlakte) aan de Gyproc-plaat , waar de monitor op bevestigd moest worden.

As per instructions, for height adjustment, the monitor must be lifted to the top position in order to slide down to the lowest peg. Doing so allows the ratchet mechanism to engage so that the bracket height can be adjusted upwards in increments. This also means you must ensure that the monitor has sufficient clearance to be lowered to the bottom position of the mount. Material is sturdy and various screws were provided for VESA/wall mount as well as drywall plugs.

Ajustes muitos precisos. Tamanho ideal.

I was looking for a slim monitor mount that would hold the monitor as close to the wall as possible since I have a small space. This one puts the screen about 3 inches from the wall (of course this will vary a bit depending on your monitor). The tilt, angle, and rotation adjustments are very easy once the monitor is installed. The up/down adjustment is easy enough but, due to the design of the locking mechanism, it can only move upwards, that is until you reach the very top, then the locking mechanism disengages, allowing you to move it downward again. Starting to move upward re-engages the locking mechanism. So it's a little bit annoying and tricky if you wish to move the monitor down by only a single notch or two. But you should only need to do it once and then you're set. Note also that this mount has no side-to-side adjustment at all, so you need to be very careful to drill your holes in just the right spot if you are particular about where you'll want your monitor to be horizontally. But other than that, installation is very easy, the instructions are good and clear. Other reviews have mentioned that the provided wall anchors are cheap and breakable, but mine came with very large white plastic "screw in" style of anchors, very sturdy. Highly recommend!

Lo he usado con un monitor de 24” para tenerlo lo más pegado posible a la pared y me ha gustado mucho. El sistema de subir y bajar es por pasos, es decir, por enganches tipo cremallera y para bajar primero tienes que subir del todo, no es lo más cómodo del mundo pero tampoco voy a estar subiendo y bajando 10 veces al día. El soporte da un poco de juego de inclinación vertical y horizontal y también puedes poner el monitor totalmente vertical, puedes girarlo 360°. Los tacos y tornillos para anclarlo a pared no me han gustado mucho y yo he puesto los míos propios.